meson-gx-common

shared template

Common Amlogic Meson GX configuration

This template is not a device-type: it holds the settings shared by the 13 device-types that extend it, directly or not.

View source on GitLab

Inheritance

meson-gx-common
base-uboot
base

Inheritance tree

meson-gx-common 13 device-types

Device-types extending meson-gx-common (13)

Device type	Vendor	Arch	Through
meson-axg-s400	Amlogic	arm64	directly
meson-g12a-u200	Amlogic	arm64	directly
meson-gxbb-nanopi-k2	Amlogic	arm64	directly
meson-gxbb-p200	Amlogic	arm64	directly
meson-gxl-s805x-libretech-ac	Amlogic	arm64	directly
meson-gxl-s805x-p241	Amlogic	arm64	directly
meson-gxl-s905d-p230	Amlogic	arm64	directly
meson-gxl-s905x-khadas-vim Common Amlogic Meson GX configuration	Amlogic	arm64	directly
meson-gxl-s905x-libretech-cc	Amlogic	arm64	directly
meson-gxl-s905x-p212	Amlogic	arm64	directly
meson-gxm-khadas-vim2	Amlogic	arm64	directly
meson-gxm-q200	Amlogic	arm64	directly
meson-sm1-odroid-c4	Amlogic	arm64	directly

# Common Amlogic Meson GX configuration
{% extends 'base-uboot.jinja2' %}

{% set uboot_mkimage_arch = 'arm64' %}
{% set console_device = console_device|default('ttyAML0') %}
{% set baud_rate = baud_rate|default(115200) %}
{% set interrupt_prompt = interrupt_prompt|default('stop autoboot') %}
{% set interrupt_ctrl_list = ['c'] %}

{% set bootm_kernel_addr = '0x8080000' %}
{% set bootm_dtb_addr = '0x8008000' %}
{% set bootm_ramdisk_addr = '0x13000000' %}

{% if use_mainline_uboot %}
{% set booti_kernel_addr = '0x8080000' %}
{% set booti_dtb_addr = '0x8008000' %}
{% set booti_ramdisk_addr = '0x13000000' %}
{% endif %}