imx6qdl-common

shared template

This template is not a device-type: it holds the settings shared by the 6 device-types that extend it, directly or not.

Inheritance

imx6qdl-common
base-uboot
base

Inheritance tree

Device-types extending imx6qdl-common (6)

Device type	Vendor	Arch	Through
imx6dl-sabreauto	NXP	arm	directly
imx6dl-sabresd	NXP	arm	directly
imx6q-sabreauto	NXP	arm	directly
imx6q-sabresd	NXP	arm	directly
imx6qp-sabreauto	NXP	arm	directly
imx6qp-sabresd	NXP	arm	directly

{% extends 'base-uboot.jinja2' %}


{% set fastboot_options = fastboot_options|default(['-i', '0x18D1']) %}
{% set fastboot_sequence = fastboot_sequence|default(['reboot']) %}
{% set fastboot_boot_uboot = "
" %}
{% set fastboot_deploy_uboot_commands = fastboot_deploy_uboot_commands|default(['fastboot 0']) %}
{% set flash_cmds_order = flash_cmds_order|default(['bootloader', 'bootloader_a', 'bootloader_b', 'bootloader0',
                           'gpt', 'boot', 'boot_a', 'boot_b', 'dtbo', 'dtbo_a', 'dtbo_b',
                           'vbmeta', 'vbmeta_a', 'vbmeta_b', 'system', 'system_a', 'system_b',
                           'vendor', 'vendor_a', 'vendor_b', 'recovery']) %}

{% set device_info = device_info|default([{'board_id': fastboot_serial_number}]) %}
{% set adb_serial_number = adb_serial_number|default(fastboot_serial_number) %}

{% set extra_nfsroot_args = extra_nfsroot_args | default(',v3') %}
{# set uboot_needs_usb = 'true' #}
{% set uboot_mac_addr = uboot_mac_addr|default('') %}
{% set console_device = console_device|default('ttymxc0') %}
{% set baud_rate = baud_rate|default(115200) %}
{% set boot_character_delay = boot_character_delay|default(5) %}
{% set test_character_delay = test_character_delay|default(5) %}
{% set base_kernel_args = base_kernel_args|default('') %}
{% set use_uboot_env_addr = use_uboot_env_addr | default(true) %}
{% if use_uboot_env_addr %}
{% set booti_kernel_addr = booti_kernel_addr | default('${loadaddr}') %}
{% set booti_tee_addr = booti_tee_addr | default('${tee_addr}') %}
{% set booti_ramdisk_addr = booti_ramdisk_addr | default('${initrd_addr}') %}
{% set booti_dtb_addr = booti_dtb_addr | default('${fdt_addr}') %}
{% else %}
{% set booti_kernel_addr = booti_kernel_addr | default('0x12000000') %}
{% set booti_tee_addr = booti_tee_addr | default('0x20000000') %}
{% set booti_ramdisk_addr = booti_ramdisk_addr | default('0x12C00000') %}
{% set booti_dtb_addr = booti_dtb_addr | default('0x18000000') %}
{% endif %}
{% set bootz_kernel_addr = booti_kernel_addr %}
{% set bootz_tee_addr = booti_tee_addr %}
{% set bootz_ramdisk_addr = booti_ramdisk_addr %}
{% set bootz_dtb_addr = booti_dtb_addr %}
{% set bootm_kernel_addr = bootz_kernel_addr %}
{% set bootm_tee_addr = bootz_tee_addr %}
{% set bootm_ramdisk_addr = bootz_ramdisk_addr %}
{% set bootm_dtb_addr = bootz_dtb_addr %}
{% set usb_uuid = usb_uuid|default('') %}
{% set usb_device_id = usb_device_id|default('') %}
{% set uboot_mkimage_arch = 'arm' %}
{% set uboot_extra_error_message = 'Unknown command' %}
{% set action_timeout_power_off = action_timeout_power_off | default(10) %}
{% set action_timeout_download_retry = action_timeout_download_retry | default(15) %}
{% set action_timeout_http_download = action_timeout_http_download | default(15) %}
{% set shutdown_message = shutdown_message|default("Restarting system") %}