juno-uefi

Overridable variables (5)

Variables set with a default value in this template. They can be overridden from the device dictionary or, for some of them, from the job context.

Fixed settings (1)

{# device_type: juno #}
{% extends 'base.jinja2' %}

{% set console_device = console_device | default('ttyS0') %}
{% set baud_rate = baud_rate | default('115200') %}
{% set base_kernel_args = base_kernel_args | default('') %}

{% set tftp_bootargs = tftp_bootargs | default('console=' + console_device + ',' + baud_rate + ' earlyprintk=uart8250-32bit,0x1c020000 debug root=/dev/nfs rw nfsroot={SERVER_IP}:{NFSROOTFS},tcp,hard {{ base_ip_args }}') %}
{% set nor_flash_bootargs = nor_flash_bootargs | default('dtb=board.dtb initrd=ramdisk.img console=' + console_device + ',' + baud_rate + ' androidboot.hardware=juno systemd.log_target=null rootwait root=/dev/sda1') %}

{% if not hard_reset_command %}
    {% if power_off_command and power_on_command %}
        {% set hard_reset_command = power_off_command + '; sleep 10; ' + power_on_command %}
    {% endif %}
{% endif %}

{% block body %}

character_delays:
  boot: 50

actions:
  deploy:
    # list of deployment methods which this device supports
    methods:
      tftp:
  boot:
    # list of connection methods which this device supports
    connections:
      serial:
    # list of boot methods which this device supports.
    methods:
      uefi-menu:
        parameters:
          character_delay: 300
          interrupt_prompt: The default boot selection will start in
          interrupt_string: ' '
          item_markup:
            - "["
            - "]"
          item_class: '0-9'
          separator: ' '
          label_class: 'a-zA-Z0-9\\s\\:'
          bootloader_prompt: 'Start:'
          boot_message: "Loaded: LinuxImage"
          # interrupt: # character needed to interrupt u-boot, single whitespace by default
          # method specific stanza
        nor_flash:
        -  select:
            items:
             - 'Boot Manager'
            wait: "Choice:"
        - select:
            items:
               - 'Add Boot Device Entry'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'NOR Flash'
            wait: "File path of the EFI Application or the kernel:"
        - select:
            enter: norkern
            wait: "Is an EFI Application?"
        - select:
            enter: n
            wait: "Has FDT support?"
        - select:
            enter: y
            wait: "Add an initrd:"
        - select:
            enter: n
            wait: 'Arguments to pass to the binary:'
        - select:
            enter: "{{ nor_flash_bootargs }}"
            wait: 'Description for this new Entry:'
        - select:
            enter: '{TEST_MENU_NAME}'
            wait: "Choice:"
        - select:
            items:
              - 'Update FDT path'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'TFTP on MAC Address: {{ mac_address }}'
            wait: "File path of the FDT blob:"
        - select:
            enter: 'board.dtb'
            wait: "Choice:"
        - select:
            items:
               - 'Return to main menu'
            wait: "Start:"
        - select:
            items:
              - '{TEST_MENU_NAME}'
        tftp:
        - select:
            items:
             - 'Boot Manager'
            wait: "Choice:"
        - select:
            items:
               - 'Add Boot Device Entry'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'TFTP on MAC Address: {{ mac_address }}'
            wait: "Get the IP address from DHCP:"
        - select:
            enter: y
            wait: "Get the TFTP server IP address:"
        - select:
            enter: '{SERVER_IP}'
            wait: "File path of the EFI Application or the kernel :"
        - select:
            enter: '{KERNEL}'
            wait: "Is an EFI Application?"
        - select:
            enter: n
            wait: "Has FDT support?"
        - select:
            enter: y
            wait: "Add an initrd:"
        - select:
            enter: n
            wait: 'Arguments to pass to the binary:'
        - select:
            enter: "{{ tftp_bootargs }}"
            wait: 'Description for this new Entry:'
        - select:
            enter: '{TEST_MENU_NAME}'
            wait: "Choice:"
        - select:
            items:
              - 'Update FDT path'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'TFTP on MAC Address: {{ mac_address }}'
            wait: "Get the IP address from DHCP:"
        - select:
            enter: y
            wait: "Get the TFTP server IP address:"
        - select:
            enter: '{SERVER_IP}'
            wait: "File path of the FDT blob :"
        - select:
            enter: '{DTB}'
            wait: "Choice:"
        - select:
            items:
               - 'Return to main menu'
            wait: "Start:"
        - select:
            items:
              - '{TEST_MENU_NAME}'
{% endblock body %}


{% block parameters %}
parameters:
  media:  # four USB slots.
    usb:
      UUID-required: True
      {{ usb_label|default('Kingston_DataTraveler') }}:
        uuid: "{{ usb_uuid }}"
        device_id: "{{ usb_device_id|default(0) }}"  # the bootloader device id for this media on the 'usb' interface
{% endblock parameters %}

hostname: 'juno-uefi-01'
devicetype: 'juno-uefi'
constants:

  # POSIX os (not AOSP)
  posix:
    lava_test_sh_cmd: /bin/sh
    lava_test_results_dir: /lava-%s
    lava_test_shell_file: ~/.bashrc

  # bootloader specific
  barebox:
    interrupt-prompt: 'Hit m for menu or any other key to stop autoboot'
    interrupt-character: '
'
    final-message: 'Starting kernel'
    error-messages:
      - '### ERROR ### Please RESET the board ###'
      - 'ERROR: .*'
      - '.*: Out of memory'
  u-boot:
    interrupt-prompt: 'Hit any key to stop autoboot'
    interrupt-character: ' '
    interrupt_ctrl_list: []
    interrupt-newline: True
    final-message: 'Starting kernel'
    error-messages:
      - 'Resetting CPU'
      - 'Must RESET board to recover'
      - 'TIMEOUT'
      - 'Retry count exceeded'
      - 'Retry time exceeded; starting again'
      - 'The remote end did not respond in time.'
      - 'File not found'
      - 'Bad Linux ARM64 Image magic!'
      - 'Wrong Ramdisk Image Format'
      - 'Ramdisk image is corrupt or invalid'
      - 'ERROR: Failed to allocate'
      - 'TFTP error: trying to overwrite reserved memory'
      - 'Bad Linux RISCV Image magic!'
      - 'Wrong Image Format for boot'
      - 'ERROR: Did not find a cmdline Flattened Device Tree'
      - 'ERROR: RD image overlaps OS image'
      - 'kernel_comp_addr_r or kernel_comp_size is not provided'
      - 'zimage: Bad magic'
    dfu-download: 'DOWNLOAD \.\.\. OK\r\nCtrl\+C to exit \.\.\.'
  grub:
    interrupt-prompt: 'for a command-line'
    interrupt-character: 'c'
    interrupt-newline: False
    error-messages:
      - "error: missing (.*) symbol."
      - "error: couldn't send network packet"
      - "error: destination unreachable"
      - "error: couldn't autoconfigure"
      - "error: timeout reading"
      - "error: you need to load the kernel first."
      - "error: file '(.*)' not found"
      - "error: no such device"
      - "error: disk '(.*)' not found"
      - "error: unknown filesystem"
  grub-efi:
    interrupt-prompt: 'for a command-line'
    interrupt-character: 'c'
    error-messages:
      - 'Undefined OpCode Exception PC at'
      - 'Synchronous Exception at'
      - "error: missing (.*) symbol."
      - "error: couldn't send network packet"
      - "error: destination unreachable"
      - "error: couldn't autoconfigure"
      - "error: timeout reading"
      - "error: you need to load the kernel first."
      - "error: file '(.*)' not found"
      - "error: no such device"
      - "error: disk '(.*)' not found"
      - "error: unknown filesystem"
  ipxe:
    interrupt-prompt: 'Press Ctrl-B for the iPXE command line'
    interrupt_ctrl_list: ['b']
    error-messages:
      - 'No configuration methods succeeded'
      - 'Connection timed out'
  depthcharge:
    final-message: 'Starting kernel'
    error-messages:
      - 'Tftp failed.'
      - 'Dhcp release failed.'
      - 'No space left for ramdisk'
      - 'TFTP failed for ramdisk.'
      - 'Dhcp release failed.'
      - 'Out of space adding TFTP server IP to the command line.'
      - 'No network device.'
      - 'Error code \d+( \([\w\s]+\))?\r\n'
  # OS shutdown message
  # Override: set as the shutdown-message parameter of an Action.
  # SHUTDOWN_MESSAGE
  shutdown-message: 'The system is going down for reboot NOW'

  # Kernel starting message
  kernel-start-message: 'Linux version [0-9]'

  # Default shell prompt for AutoLogin
  # DEFAULT_SHELL_PROMPT
  default-shell-prompt: 'lava-test: # '

  # pexpect.spawn maxread
  # SPAWN_MAXREAD - in bytes, quoted as a string
  # 1 to turn off buffering, pexpect default is 2000
  # maximum may be limited by platform issues to 4092
  # avoid setting searchwindowsize:
  # Data before searchwindowsize point is preserved, but not searched.
  spawn_maxread: '4092'

  # Set the failure retry to default or override it
  failure_retry: 1
  # Override boot_retry
  boot_retry: 
parameters:
  media:  # four USB slots.
    usb:
      UUID-required: True
      Kingston_DataTraveler:
        uuid: ""
        device_id: "0"  # the bootloader device id for this media on the 'usb' interface

character_delays:
  boot: 50

actions:
  deploy:
    # list of deployment methods which this device supports
    methods:
      tftp:
  boot:
    # list of connection methods which this device supports
    connections:
      serial:
    # list of boot methods which this device supports.
    methods:
      uefi-menu:
        parameters:
          character_delay: 300
          interrupt_prompt: The default boot selection will start in
          interrupt_string: ' '
          item_markup:
            - "["
            - "]"
          item_class: '0-9'
          separator: ' '
          label_class: 'a-zA-Z0-9\\s\\:'
          bootloader_prompt: 'Start:'
          boot_message: "Loaded: LinuxImage"
          # interrupt: # character needed to interrupt u-boot, single whitespace by default
          # method specific stanza
        nor_flash:
        -  select:
            items:
             - 'Boot Manager'
            wait: "Choice:"
        - select:
            items:
               - 'Add Boot Device Entry'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'NOR Flash'
            wait: "File path of the EFI Application or the kernel:"
        - select:
            enter: norkern
            wait: "Is an EFI Application?"
        - select:
            enter: n
            wait: "Has FDT support?"
        - select:
            enter: y
            wait: "Add an initrd:"
        - select:
            enter: n
            wait: 'Arguments to pass to the binary:'
        - select:
            enter: "dtb=board.dtb initrd=ramdisk.img console=ttyS0,115200 androidboot.hardware=juno systemd.log_target=null rootwait root=/dev/sda1"
            wait: 'Description for this new Entry:'
        - select:
            enter: '{TEST_MENU_NAME}'
            wait: "Choice:"
        - select:
            items:
              - 'Update FDT path'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'TFTP on MAC Address: '
            wait: "File path of the FDT blob:"
        - select:
            enter: 'board.dtb'
            wait: "Choice:"
        - select:
            items:
               - 'Return to main menu'
            wait: "Start:"
        - select:
            items:
              - '{TEST_MENU_NAME}'
        tftp:
        - select:
            items:
             - 'Boot Manager'
            wait: "Choice:"
        - select:
            items:
               - 'Add Boot Device Entry'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'TFTP on MAC Address: '
            wait: "Get the IP address from DHCP:"
        - select:
            enter: y
            wait: "Get the TFTP server IP address:"
        - select:
            enter: '{SERVER_IP}'
            wait: "File path of the EFI Application or the kernel :"
        - select:
            enter: '{KERNEL}'
            wait: "Is an EFI Application?"
        - select:
            enter: n
            wait: "Has FDT support?"
        - select:
            enter: y
            wait: "Add an initrd:"
        - select:
            enter: n
            wait: 'Arguments to pass to the binary:'
        - select:
            enter: "console=ttyS0,115200 earlyprintk=uart8250-32bit,0x1c020000 debug root=/dev/nfs rw nfsroot={SERVER_IP}:{NFSROOTFS},tcp,hard {{ base_ip_args }}"
            wait: 'Description for this new Entry:'
        - select:
            enter: '{TEST_MENU_NAME}'
            wait: "Choice:"
        - select:
            items:
              - 'Update FDT path'
            wait: "Select the Boot Device:"
        - select:
            items:
               - 'TFTP on MAC Address: '
            wait: "Get the IP address from DHCP:"
        - select:
            enter: y
            wait: "Get the TFTP server IP address:"
        - select:
            enter: '{SERVER_IP}'
            wait: "File path of the FDT blob :"
        - select:
            enter: '{DTB}'
            wait: "Choice:"
        - select:
            items:
               - 'Return to main menu'
            wait: "Start:"
        - select:
            items:
              - '{TEST_MENU_NAME}'
timeouts:
  actions:
    apply-overlay-image:
      minutes: 2
    dd-image:
      minutes: 10
    download-retry:
      minutes: 15
    http-download:
      minutes: 5
    lava-test-shell:
      minutes: 3
    nfs-deploy:
      minutes: 10
    power-off:
      seconds: 10
    bootloader-commands:
      minutes: 3
    bootloader-interrupt:
      seconds: 30
    u-boot-interrupt:
      seconds: 30
    umount-retry:
      seconds: 45
    auto-login-action:
      minutes: 2
    bootloader-action:
      minutes: 3
    uboot-action:
      minutes: 3
    uboot-commands:
      minutes: 3
    bootloader-retry:
      minutes: 3
    boot-qemu-image:
      minutes: 2
    boot-image-retry:
      minutes: 2
    flash-uboot-ums:
      minutes: 20
    musca-deploy:
      minutes: 3
    musca-boot:
      minutes: 1
    unmount-musca-usbmsd:
      seconds: 30
    pdu-reboot:
      seconds: 30
    reset-device:
      seconds: 30
  connections:
    dd-image:
      minutes: 10
    uboot-commands:
      seconds: 30
    bootloader-commands:
      seconds: 30
    auto-login-action:
      minutes: 2
    bootloader-interrupt:
      seconds: 30
    u-boot-interrupt:
      seconds: 30
    lava-test-shell:
      seconds: 10
    lava-docker-test-shell:
      seconds: 10

Rendered with the default values (no device dictionary), using LAVA's own template environment.