i945gsex-qs

Fixed settings (1)

{% extends 'base-grub.jinja2' %}

{% if extra_kernel_args %}
{% set extra_kernel_args = "earlycon=uart8250,io,0x3f8,115200n8 " +  extra_kernel_args %}
{% else %}
{% set extra_kernel_args = "earlycon=uart8250,io,0x3f8,115200n8" %}
{% endif %}

hostname: 'i945gsex-qs-01'
devicetype: 'i945gsex-qs'
constants:

  # POSIX os (not AOSP)
  posix:
    lava_test_sh_cmd: /bin/sh
    lava_test_results_dir: /lava-%s
    lava_test_shell_file: ~/.bashrc

  # bootloader specific
  barebox:
    interrupt-prompt: 'Hit m for menu or any other key to stop autoboot'
    interrupt-character: '
'
    final-message: 'Starting kernel'
    error-messages:
      - '### ERROR ### Please RESET the board ###'
      - 'ERROR: .*'
      - '.*: Out of memory'
  u-boot:
    interrupt-prompt: 'Hit any key to stop autoboot'
    interrupt-character: ' '
    interrupt_ctrl_list: []
    interrupt-newline: True
    final-message: 'Starting kernel'
    error-messages:
      - 'Resetting CPU'
      - 'Must RESET board to recover'
      - 'TIMEOUT'
      - 'Retry count exceeded'
      - 'Retry time exceeded; starting again'
      - 'The remote end did not respond in time.'
      - 'File not found'
      - 'Bad Linux ARM64 Image magic!'
      - 'Wrong Ramdisk Image Format'
      - 'Ramdisk image is corrupt or invalid'
      - 'ERROR: Failed to allocate'
      - 'TFTP error: trying to overwrite reserved memory'
      - 'Bad Linux RISCV Image magic!'
      - 'Wrong Image Format for boot'
      - 'ERROR: Did not find a cmdline Flattened Device Tree'
      - 'ERROR: RD image overlaps OS image'
      - 'kernel_comp_addr_r or kernel_comp_size is not provided'
      - 'zimage: Bad magic'
    dfu-download: 'DOWNLOAD \.\.\. OK\r\nCtrl\+C to exit \.\.\.'
  grub:
    interrupt-prompt: 'for a command-line'
    interrupt-character: 'c'
    interrupt-newline: False
    error-messages:
      - "error: missing (.*) symbol."
      - "error: couldn't send network packet"
      - "error: destination unreachable"
      - "error: couldn't autoconfigure"
      - "error: timeout reading"
      - "error: you need to load the kernel first."
      - "error: file '(.*)' not found"
      - "error: no such device"
      - "error: disk '(.*)' not found"
      - "error: unknown filesystem"
  grub-efi:
    interrupt-prompt: 'for a command-line'
    interrupt-character: 'c'
    error-messages:
      - 'Undefined OpCode Exception PC at'
      - 'Synchronous Exception at'
      - "error: missing (.*) symbol."
      - "error: couldn't send network packet"
      - "error: destination unreachable"
      - "error: couldn't autoconfigure"
      - "error: timeout reading"
      - "error: you need to load the kernel first."
      - "error: file '(.*)' not found"
      - "error: no such device"
      - "error: disk '(.*)' not found"
      - "error: unknown filesystem"
  ipxe:
    interrupt-prompt: 'Press Ctrl-B for the iPXE command line'
    interrupt_ctrl_list: ['b']
    error-messages:
      - 'No configuration methods succeeded'
      - 'Connection timed out'
  depthcharge:
    final-message: 'Starting kernel'
    error-messages:
      - 'Tftp failed.'
      - 'Dhcp release failed.'
      - 'No space left for ramdisk'
      - 'TFTP failed for ramdisk.'
      - 'Dhcp release failed.'
      - 'Out of space adding TFTP server IP to the command line.'
      - 'No network device.'
      - 'Error code \d+( \([\w\s]+\))?\r\n'
  # OS shutdown message
  # Override: set as the shutdown-message parameter of an Action.
  # SHUTDOWN_MESSAGE
  shutdown-message: 'The system is going down for reboot NOW'

  # Kernel starting message
  kernel-start-message: 'Linux version [0-9]'

  # Default shell prompt for AutoLogin
  # DEFAULT_SHELL_PROMPT
  default-shell-prompt: 'lava-test: # '

  # pexpect.spawn maxread
  # SPAWN_MAXREAD - in bytes, quoted as a string
  # 1 to turn off buffering, pexpect default is 2000
  # maximum may be limited by platform issues to 4092
  # avoid setting searchwindowsize:
  # Data before searchwindowsize point is preserved, but not searched.
  spawn_maxread: '4092'

  # Set the failure retry to default or override it
  failure_retry: 1
  # Override boot_retry
  boot_retry: 
parameters:
  # device_ip or device_mac

  pass: # sata_uuid_sd_uuid_usb_uuid

actions:
  deploy:
    connections:
      serial:
    methods:
      tftp:
      nbd:
  boot:
    connections:
      serial:
    methods:
      minimal:

      grub:
        parameters:
          bootloader_prompt: grub>
          needs_interrupt: True
        ramdisk:
          commands:
          - net_bootp
          - clear
          - insmod linux
          - clear
          - insmod tftp
          - clear
          - 'linux (tftp,{SERVER_IP})/{KERNEL} console=ttyS0,115200 ip=dhcp earlycon=uart8250,io,0x3f8,115200n8'
          - clear
          - initrd (tftp,{SERVER_IP})/{RAMDISK}

          - clear
          - boot
        nbd:
          commands:
          - clear
          - insmod linux
          - clear
          - insmod tftp
          - clear
          - 'linux (tftp,{SERVER_IP})/{KERNEL} console=ttyS0,115200 ip=dhcp nbd.server={NBDSERVERIP} nbd.port={NBDSERVERPORT} root=/dev/ram0 ramdisk_size=16384 rootdelay=7  rw earlycon=uart8250,io,0x3f8,115200n8'
          - clear
          - initrd (tftp,{SERVER_IP})/{RAMDISK}
          - boot
        nfs:
          commands:
          - net_bootp
          - 'linux (tftp,{SERVER_IP})/{KERNEL} console=ttyS0,115200 root=/dev/nfs rw nfsroot={NFS_SERVER_IP}:{NFSROOTFS},tcp,hard ip=dhcp earlycon=uart8250,io,0x3f8,115200n8'
          - initrd (tftp,{SERVER_IP})/{RAMDISK}

          - boot
        debian-installer:
          expect_shell: False
          commands:
          - net_bootp
          - 'linux (tftp,{SERVER_IP})/{KERNEL} auto=true interface=eth0 priority=critical noshell BOOT_DEBUG=1 DEBIAN_FRONTEND=text url=tftp://{SERVER_IP}/{PRESEED_CONFIG} --- console=ttyS0,115200 earlycon=uart8250,io,0x3f8,115200n8 debug verbose'
          - initrd (tftp,{SERVER_IP})/{RAMDISK}

          - boot
        debian-installed:
          commands:
          - insmod part_gpt
          - insmod ext2
          - insmod part_msdos
          - insmod chain
          - ls
          - ls (hd1,gpt1)
          - sleep 10
          - set
          - set root=(hd1,gpt1)
          - sleep 10
          - ls (hd1,gpt1)
          - sleep 10
          - chainloader (hd1,gpt1)/efi/debian/grubaa64.efi
          - sleep 10
          - boot
  test:
    methods:
      docker:
        global_options:
        - 
        options:
        - 
timeouts:
  actions:
    apply-overlay-image:
      minutes: 2
    dd-image:
      minutes: 10
    download-retry:
      minutes: 15
    http-download:
      minutes: 5
    lava-test-shell:
      minutes: 3
    nfs-deploy:
      minutes: 10
    power-off:
      seconds: 10
    bootloader-commands:
      minutes: 3
    bootloader-interrupt:
      seconds: 30
    u-boot-interrupt:
      seconds: 30
    umount-retry:
      seconds: 45
    auto-login-action:
      minutes: 2
    bootloader-action:
      minutes: 3
    uboot-action:
      minutes: 3
    uboot-commands:
      minutes: 3
    bootloader-retry:
      minutes: 3
    boot-qemu-image:
      minutes: 2
    boot-image-retry:
      minutes: 2
    flash-uboot-ums:
      minutes: 20
    musca-deploy:
      minutes: 3
    musca-boot:
      minutes: 1
    unmount-musca-usbmsd:
      seconds: 30
    pdu-reboot:
      seconds: 30
    reset-device:
      seconds: 30
  connections:
    dd-image:
      minutes: 10
    uboot-commands:
      seconds: 30
    bootloader-commands:
      seconds: 30
    auto-login-action:
      minutes: 2
    bootloader-interrupt:
      seconds: 30
    u-boot-interrupt:
      seconds: 30
    lava-test-shell:
      seconds: 10
    lava-docker-test-shell:
      seconds: 10

Rendered with the default values (no device dictionary), using LAVA's own template environment.